Browse all practice questions for the PE Electrical Power Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

PE Electrical Power Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Solid grounding is associated with which capability related to faults?
  • Which of the following is listed as a con of Direct On-Line/Across the Line/Full Voltage Starting?
  • For an RC transient circuit, what is the time constant tau?
  • What is the relationship between synchronous speed Ns, supply frequency f, and the number of poles p in a synchronous machine?
  • Leakage current is used as an indicator of what in insulation systems?
  • When one phase fails in a 3-phase motor and the protection fails to disconnect the circuit, what symptoms would the motor most likely exhibit while continuing to run?
  • NEC Table 450.3(A) provides which information?
  • How much time is considered continuous load?
  • In the described context, the apparent power of a balanced system can be expressed as S = 1.73 V I. Which of the following is the correct interpretation of the constant 1.73?
  • In a delta-to-wye transformation for the same overall three-phase impedance, the per-phase wye impedance ZY equals which of the following in relation to ZD?
  • Normally (ideal) Excited Synchronous Machine properties.
  • Which statement accurately describes hysteresis losses in transformers?
  • Prcl stands for which loss term?
  • The Full Load Current in Amps for DC motors is provided in NEC Table 430.247 based on which factors?
  • True or False: In a motor, the synchronous speed is greater than the rotor speed.
  • As rotor resistance increases in a wound-rotor motor, the rotor's maximum torque occurs earlier.
  • To which transformers does NEC Table 450.3(A) apply, according to the provided material?
  • Which item is noted as a pro in Ungrounded Systems' list?
  • Which statement correctly describes the impedance Z in the context of the motor’s equivalent circuit?
  • Which statement is a primary advantage of Reduced Voltage Autotransformer Starting?
  • For an RL transient circuit, what is the time constant tau?
  • What does NEC Table 430.52 specify?
  • The constant 1.73 used in the apparent power expression is an approximation of which mathematical constant?
  • At a 60 Hz supply, what is the synchronous speed of a 6-pole machine?
  • Which statement is a disadvantage of Reduced Voltage Autotransformer Starting?
  • A buck converter is used to
  • Which label corresponds to the hottest temperature on the Battery Temperature, Capacity, and Discharge Graph?
  • A different set of data gives Pin = 1300 W, Pscl = 70 W, Pcore = 50 W, Pf&w = 25 W, Pmisc = 15 W, and Prcl = 190 W. What is the resulting Pout?
  • NEC 450.7 covers which topic?
  • In ladder logic, an XIC bit is true under which condition?
  • Under the model, Pout equals Pconv and also equals Pag minus Prcl.
  • Which phrase describes a benefit related to troubleshooting in impedance-grounded systems?
  • What does a Neutral Grounding Resistor (NGR) relate to in grounding schemes?
  • In a traditional two-winding transformer, how is power transferred from the primary to the secondary?
  • Which expression gives rotor-copper loss for conversion?
  • At the exact moment of a fault, which condition holds?
  • How many wattmeters are typically required to measure the real power of a balanced three-phase system?
  • Which statement is associated with nuisance in Solid Ground Cons?
  • How is Synchronous Power defined?
  • In the induction motor power flow expression Pin for a 1-phase machine, what does cos(theta) represent?
  • In line frequency changing voltage, what happens to voltage as frequency increases?
  • Which of the following are potential concerns when using a variable frequency drive to control the speed of an induction motor?
  • In theoretical values for electrochemical reactions, which components are considered?
  • Which starting method uses a series resistor to limit starting current?
  • Select the statement that is most accurate in regards to rated transformer voltage and power.
  • Which is identified as the fastest ground fault clearing in the solid ground pros?
  • Which statement explains why autotransformers are cheaper to manufacture than standard two-winding transformers?
  • In a balanced positive-sequence system, a wye-connected load exhibits which relationship between phase voltage and line voltage?
  • Which starting method is typically the cheapest option for starting large motors?
  • Which of the following is a disadvantage of solid grounding in power systems?
  • Which statement is true about induction motor performance?
  • Compared to resistor starting, reduced voltage autotransformer starting reduces what?
  • Which device converts DC to AC?
  • What is the typical torque angle range for rate power operation?
  • Pout definition in the model is?
  • Which current is most responsible for drawing the most microamps once steady-state conditions have been reached after applying the voltage?
  • What describes magnetic saturation?
  • Past the knee point is used to describe the onset of which phenomenon?
  • In impedance-grounded systems, which is a listed capability?
  • Which item is a listed pro of ungrounded systems?
  • The relationship between speed and frequency is:
  • What is the advantage of a controlled AC-to-DC rectifier compared to an uncontrolled AC-to-DC rectifier?
  • Which expression gives stray-load loss Pscl?
  • What is the function of a seal-in or latching contact in a motor start circuit?
  • For a generator operating as a motor, which statement correctly describes the torque angle?
  • In the induction motor equivalent circuit, which term represents the total leakage reactance seen by the stator, combining X1 and X2?
  • The cylindrical rotor is characterized by which of the following?
  • What does the term ripple describe in power electronics?
  • In theoretical values for electrochemical reactions, which components are considered?
  • Pmisc denotes what?
  • When a synchronous generator dampens back to steady state, what is the relationship between Pe and Pm?
  • Which information is best used to determine the discharge power level of a battery?
  • Select the statement that most accurately describes why the nameplate power rating of transformers is typically expressed in volt-amps instead of watts.
  • What must be done to safely operate a 60 Hz transformer using 50 Hz power supply?
  • Which NEC section defines continuous-duty motors?
  • Pole changing can produce different speed-torque behavior. Which option describes a pole-changing outcome of constant torque with varied speed?
  • Which NEC table is used for conductor sizing by temperature rating and ampacity?
  • What components are responsible for I^2R heat losses in a transformer?
  • What happens to the actual capacity of a lead-acid battery as the discharge current increases?
  • The salient pole rotor is typically associated with which feature?
  • Breakdown torque condition: R2/SmaxT = Z = sqrt(R1^2 + (X1+X2)^2). Which expression gives SmaxT?
  • NEC Table 240.6(A) lists which information?
  • What does the governor of a synchronous generator control?
  • Which inequality describes the typical order of Pin, Pout, and Ploss?
  • GEC stands for in electrical grounding terminology?
  • Synchronous Generator: E LAGS E0; Torque Angle > 0.
  • In a solid grounding context, which term describes a direct path to earth for fault currents?
  • The temperature limitations on conductors are addressed by which NEC section?
  • Pf&w denotes what in this framework?
  • In volts-per-hertz mode operating at slower than rated speed, which statement about motor torque is most accurate?
  • Which starting method is associated with a large inrush current?
  • NGR stands for?
  • Which statement is NOT a pro of Reduced Voltage Resistor Starting?
  • In ladder logic, an XIO bit is true under which condition?
  • Pconv or Pm is defined as?
  • Under-Excited Synchronous Machine characteristics include which of the following?
  • In an AC system, where both the voltage and current are purely sinusoidal and share the same frequency, what is the frequency of the instantaneous power?
  • Which statement describes copper I^2R losses in transformers?
  • In NEC 430.7(B), does the locked rotor code letter equal the NEMA design letter?
  • Rotor Reaches Max Torque Angle: which is true?
  • Volts-per-hertz ratio rule for changing frequency is expressed as which option?
  • In a wound-rotor induction motor, increasing rotor resistance primarily alters speed-torque by adding resistance. What is the typical effect on efficiency?
  • Which formula correctly defines apparent power S in an AC circuit?
  • Single phase to three phase conversion: P-3p equals which of the following in terms of P-1p?
  • Which expression represents Zeq used to compute Ib in the per-phase model?
  • Exact moment fault is cleared: which condition occurs?
  • Which form(s) of Peukert's law relate to discharge time and capacity?
  • What information does the design-class letter on an induction motor's nameplate primarily represent?
  • Which statement best describes the relationship between speed and frequency?
  • Which NEC section covers Rating or Setting for an Individual Motor Circuit?
  • In volts-per-hertz control for an induction motor, which situation would likely cause magnetic saturation of the motor core?
  • Air gap power Pag or Pr equals which of the following?
  • Which term represents stator core losses in the motor power flow model?
  • PWM output of a VFD can lead to which effect on the motor windings?
  • The rotor type for which Xs equals Xd equals X is which?
  • According to the notes, a reactor is described as being purely inductive.
  • Breakdown slip SmaxT is defined as which of the following?
  • Which item is listed as a pro of solid grounding in the material?
  • In an autotransformer, only part of the power goes through induction; the remainder is conducted through the common winding.
  • Which expression correctly represents Zeq used to compute the stator current Ib?
  • What does NEC 430.52(C) address?
  • Which expression gives rotor copper loss related to the slip?
  • Which expression gives core loss Pcore?
  • In a relay-based motor start circuit, what does pressing the Stop button do to the contacts?
  • In polyphase motor disconnect sizing, which statement is correct?
  • Which component reduces output voltage relative to input?
  • What is the purpose of the starting capacitor used for a 1-phase induction motor?
  • NEC Article 430 governs which of the following?
  • The Temperature Limitations on conductor sizing are specified in which NEC section?
  • What is the primary function of a boost converter?
  • What do practical values represent?
  • The Full Load Current for three-phase AC motors is provided by NEC Table 430.250 based on which factors?
  • Which expression gives rotor copper loss Prcl?
  • Which label corresponds to room temperature?
  • In volts-per-hertz mode, at rated speed what is true about torque and horsepower?
  • Select the statement that is true when the windings of a standard power transformer are reconnected to create an autotransformer.
  • During a fault, which of the following is true?
  • The knee point on a voltage-current curve indicates the onset of which phenomenon?
  • Which component is used in a controlled rectifier to allow external gate signals to adjust the average output voltage?
  • What information about lead-acid batteries is determined using Peukert's constant and Peukert's law?
  • Which table provides the Full Load Current in Amps for DC motors?
  • Which label corresponds to the coldest temperature?
  • Which rotor type is typically used for slow-speed generation?
  • Motor efficiency formula is?
  • Which current is not a typical insulation-related current type?
  • The Full Load Current in Amps for single-phase AC motors is determined by which of the following?
  • In a motor operation, which statement is true about rotor speed relative to synchronous speed?
  • For a 1-phase induction motor, how is input power Pin calculated?
  • T/F: Reactors improve power quality and also improve power factor.
  • Which statement describes rotor copper losses in transformers?
  • In steady-state operation before any fault, which statement is true?
  • What is the modern drive type used for speed control of induction motors?
  • Ploss is defined as which expression?
  • Which current type is listed among insulation-related currents and contrasted with leakage?
  • Select the statement that describes the changes that occur when the torque demand of a motor suddenly increases when the motor is already operating at rated speed.
  • In a balanced negative-sequence system, a delta-connected load exhibits which relationship between phase current and line current?
  • Which is a pro of Direct On-Line/Across the Line/Full Voltage Starting?
  • In a full-bridge square wave inverter with RL load, what happens if all four switches are closed simultaneously?
  • The cylindrical rotor is commonly designed for which pole count?
  • For a delta-connected load with phase impedance ZD and line-to-line voltage VLL, which expression gives the delta line current I_line?
  • Which two variables determine the speed of an induction motor?
  • In a synchronous motor, the internal emf E leads E0 and the torque angle is negative.
  • Single Phase Motor Disconnect Sizing, per NEC Table 430.250(A), is based on which factors?
  • In a balanced positive-sequence system, a delta-connected load exhibits which relationship between phase current and line current?
  • What does NEC 430.24 define?
  • For a 3-phase induction motor, how is input power Pin calculated?
  • In an isolated synchronous generator not connected to the grid, if the speed of the prime mover changes, what happens to the output frequency?
  • Autotransformers lack electrical isolation, making them less safe but cheaper.
  • Pole-changing methods are categorized by their speed-torque behavior. Which of the following is one of the described types?
  • If Pin = 1100 W, Pscl = 60 W, Pcore = 40 W, Pf&w = 30 W, Pmisc = 20 W, and Prcl = 200 W, what is Pout?
  • Which expression gives air-gap power Pag?
  • What does the acronym GFC stand for?
  • Which of the following best describes the power flow from input to output with losses?
  • What information does the code letter on an induction motor's nameplate primarily represent?
  • In a balanced negative-sequence system, a wye-connected load exhibits which relationship between phase voltage and line voltage?
  • In insulation testing, the majority of tests focus on which current?
  • Which functions are provided by the control circuit in motor starting?
  • The term NEMA designation for Torque vs Speed curve slip characteristics describes which motor behavior?
  • A complex three-phase load has the same power rating and power factor whether it is connected in wye or in delta. Which statement is true?
  • Using a variable frequency drive, what happens to the motor's synchronous speed as the drive frequency increases?
  • In the simplified model, Pf&w and Pmisc are neglected.
  • In a generator operating as a motor, which inequality correctly describes Pe (output power) and Pm (mechanical input power)?
  • What do standard values describe in the given context?
  • During damping, what is the rotor speed relative to the synchronous speed ns?
  • The salient pole rotor is characterized by which reactance configuration?
  • Magnetic saturation occurs after surpassing which feature on the V–I curve?
  • Which is a listed con of ungrounded systems?
  • For continuous loads, what factor is applied to full-load ampacity when sizing conductors?
  • For a balanced three-phase system, if a load is delta-connected and then reconfigured to a wye connection with the same line-to-line voltage, the line current will:
  • Which statement describes eddy current losses in transformers?
  • During damping, what is the torque angle relative to the initial torque angle?
  • Maintaining a constant volts-per-hertz ratio helps prevent which phenomenon in magnetic devices?
  • Rotor Reaches Initial Torque Angle: which statement is true?
  • For a balanced three-phase system, changing from a wye-connected load to a delta-connected load with the same per-phase impedance results in the apparent power drawn being:
  • For a given frequency, what is the effect of increasing the number of poles on synchronous speed?
  • Over-Excited Synchronous Machine characteristics include which of the following?
  • Which statement about the torque angle sign is true for a generator?
  • In NEC 430.7(B), what does the 'Locked Rotor Indicating Code Letters' specify?
  • Which expression represents input power Pin in the induction motor equivalent circuit?
  • For a generator operating as a motor, how does rotor speed n relate to the synchronous speed ns?
  • In a relay-based motor start circuit, what happens to the contacts when the Start button is pressed?
  • What is the primary purpose of adding a shunt capacitor to the output of an AC-to-DC rectifier?
  • To accurately measure the real power drawn by an unbalanced three-phase system, how many wattmeters are required?
  • The cylindrical rotor is typically associated with which statement?
  • An inverter is used to
  • Under what condition would you choose to use an autotransformer instead of a standard power transformer?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy